Acceptance Steps for manual compact rack

2020/09/17

1. Trial after installation and debugging

After purchasing the dense rack, the customer will try it first. At this time, the power-on trial is not to test whether the dense rack is operating normally, but whether the entire dense rack and the sound generated by the dense rack are loud during the operation. It is best if you can hear within 10cm.

2. Check whether the arrangement of dense racks is reasonable

Before using the file storage rack, consider the placement of the storage rack. Choose a place with a larger space. The compact rack with the built-in compressor unit must ensure that there is enough space on the top of the compact rack for heat dissipation, and the side walls cannot be close to the wall. In order to save space, some supermarket convenience store merchants are close to the wall, which does save space, but it is not conducive to inspection and cleaning of dense racks and heat dissipation, which is prone to various small problems.

3. Overall inspection of file storage

Check the side walls of the compact shelf as a whole, and at the same time, check whether the compact shelf works well after the items are placed on the shelf and whether the small parts such as the compressor joints are completely ok.

4. Overall movement of the file storage rack

After everything is checked, it can be turned on. During operation, the shelves where items are placed inside the compact shelves should be disinfected first, so as to ensure that the food or products on the shelves of the compact shelves should be cleaned first.

5. Dense shelf control

This is necessary. The dense shelf must be controlled first during operation, otherwise improper regulation will cause damage to the sales items.

6. Shelf brake

After using the compact shelf, turn off the compact shelf. When closing the compact shelf, unplug the thermostat first, otherwise the thermostat may be damaged.